SSC Junior Engineer Syllabus: – Staff Selection Commission Junior Engineers (Civil, Mechanical, Electrical, Quantity Surveying and Contract) Examination Syllabus details are given below….
Syllabus: – The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil, Electrical, Mechanical) from a recognized Institute/Board or University/recognised by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below:
Paper-I: – Paper l will consist of General Intelligence & Reasoning, General Awareness, General Engineering (Civil and Structural), Electrical & Mechanical.
- General Intelligence & Reasoning: – The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgement, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and ﬁgure classiﬁcation, arithmetical number series etc. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.
- General Awareness: – Questions will be aimed at testing the candidate’s general awareness of the environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientiﬁc aspect as may be expected of any educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientiﬁc Research, etc. These questions will be such that they do not require a special study of any discipline.
- General Engineering (Civil and Structural), (Electrical & Mechanical):-
Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering.
Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design.
Electrical Engineering:- Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics.
Mechanical Engineering: – Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials, Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication, Rankine cycle of System, Boilers, Classiﬁcation, Speciﬁcation, Fitting & Accessories, Air Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines.
Properties & Classiﬁcation of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid
Kinematics, Dynamics of Ideal ﬂuids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classiﬁcation of steels.
Part-A: Civil & Structural Engineering
Building Materials: – Physical and Chemical properties, classiﬁcation, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and Wood based products, laminates, bituminous materials, paints, varnishes.
Estimating, Costing and Valuation: – estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC Work, Shuttering, Timber work, Painting, Flooring, Plastering, Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpson’s rule, Cost estimate of Septic tank, ﬂexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation — Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.
Surveying: – Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Deﬁnition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment.
Soil Mechanics: – Origin of soil, phase diagram, Deﬁnitions-void ratio, porosity, degree of saturation, water content, speciﬁc gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses, Index properties of soils, Atterberg’s limits, ISI soil classiﬁcation and plasticity chart, Permeability of soil, coefﬁcient of permeability, determination of coefficient of permeability, Unconﬁned and conﬁned aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test, Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, bearing capacity of soils, plate load test, standard penetration test.
Hydraulics: – Fluid properties, hydrostatics, measurements of ﬂow, Bernoulli’s theorem and its application, ﬂow through pipes, ﬂow in open channels, weirs, flumes, spillways, pumps and turbines.
Irrigation Engineering: – Deﬁnition, necessity, beneﬁts, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefﬁcient, rain gauge, losses from precipitation – evaporation, inﬁltration, etc. water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies, different type of canals, types of canal irrigation, loss of water in canals, Canal lining – types and advantages, Shallow and deep to wells, yield from a well, Weir and barrage, Failure of Weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity, Lacey’s theory of uniform ﬂow, Deﬁnition of ﬂood, causes and effects, methods of flood control, water logging, preventive measure, Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes, Major irrigation projects in India.
Transportation Engineering: – Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of ﬂexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, ﬁxtures and fastening, track geometry, points and crossings, track junction, stations and yards, Traffic Engineering – Different traffic survey, speed-ﬂow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.
Environmental Engineering: – Quality of water, source of water supply, puriﬁcation of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments, Surface water drainage, Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control and noise pollution – cause, health effects, control.
Theory of structures: – Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deﬂection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.
Concrete Technology: – Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, ﬁnishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.
RCC Design: – RCC beams-ﬂexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels, one way and two way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).
Steel Design: – Steel design and construction of steel columns, beams roof trusses plate girders.
Basic concepts: – Concepts of resistance, inductance, capacitance, and various factors affecting them, Concepts of current, voltage, power, energy and their units.
Circuit law: – Kirchhoff‘s law, Simple Circuit solution using network theorems.
Magnetic Circuit: – Concepts of ﬂux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different conﬁguration e.g. straight, circular, solenoidal, etc, Electromagnetic induction, self and mutual induction.
AC Fundamentals: – Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R, L and C, Resonance, Tank Circuit, Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.
Measurement and measuring instruments: – Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement, Measurement of frequency and phase angle, Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges, Use of CRO, Signal Generator, CT, PT and their uses, Earth Fault detection.
Electrical Machines: –
(a) D.C. Machine: – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors, Method of braking motor, Losses and efficiency of D.C. Machines.
(b) 1 phase and 3 phase transformers: – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency, Effect of voltage, frequency and wave form on losses, Parallel operation of 1 phase /3 phase transformers, Auto transformers.
(c) 3 phase induction motors, rotating magnetic ﬁeld, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors, Methods of braking, effect of voltage and frequency variation on torque speed characteristics.
Fractional Kilowatt Motors and Single Phase Induction Motors: – Characteristics and applications.
Synchronous Machines: – Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power, Starting and applications of synchronous motors.
Generation, Transmission and Distribution: – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations, Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults, Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars, Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system, Cable – Different type of cables, cable rating and derating factor.
Estimation and costing: – Estimation of lighting scheme, electric installation of machines and relevant IE rules, Earthing practices and IE Rules.
Utilization of Electrical Energy: – Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors.
Basic Electronics: – Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET, Simple circuits using these devices.
Part- C (Mechanical Engineering):-
Theory of Machines and Machine Design:-
Concept of simple machine, Four bar linkage and link motion, Flywheels and ﬂuctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear proﬁle and gear ratio calculation, Governors – Principles and classiﬁcation, Riveted joint, Cams, Bearings, Friction in collars and pivots.
Engineering Mechanics and Strength of Materials:-
Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler’s and Rankin’s theories, Thin walled pressure vessels.
Properties of Pure Substances:- p-v & P-T diagrams of pure substance like H20, Introduction of steam table with respect to steam generation process; deﬁnition of saturation, Wet & superheated status, Deﬁnition of dryness fraction of steam, degree of superheat of steam, H-s chart of steam (Mollier’s Chart).
1st Law of Thermodynamics: – Deﬁnition of stored energy & internal energy, 1st Law of
Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Deﬁnition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation.
2nd Law of Thermodynamics: – Deﬁnition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin — Planck & Clausius Statements of 2“ Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes, Carnot Cycle & Carnot Efficiency, PMM-2; deﬁnition & its impossibility.
Air standard Cycles for IC engines: – Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency. IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication.
Rankine cycle of steam:- Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump Work.
Boilers; Classiﬁcation; Speciﬁcation; Fittings & Accessories: Fire Tube & Water Tube Boilers.
Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeration Plant; Nozzles & Steam Turbines
Fluid Mechanics & Machinery
Properties & Classiﬁcation of Fluid: – ideal & real ﬂuids, Newton’s law of viscosity, Newtonian and Non-Newtonian ﬂuids, compressible and incompressible ﬂuids.
Fluid Statics: – Pressure at a point.
Measurement of Fluid Pressure: – Manometers, U-tube, Inclined tube.
Fluid Kinematics: – Stream line, laminar & turbulent ﬂow, external & internal ﬂow, continuity equation.
Dynamics of ideal ﬂuids: – Bernoulli’s equation, Total head; Velocity head; Pressure head; Application of Bernoulli’s equitation.
Measurement of Flow rate Basic Principles: – Venturimeter, Pilot tube, Oriﬁce meter.
Hydraulic Turbines: – Classiﬁcations, Principles. Centrifugal Pumps: Classiﬁcations, Principles, Performance. Production Engineering
Classiﬁcation of Steels: – mild steal & alloy steel, Heat treatment of steel, Welding — Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting — methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (m) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.